Latest Designs

Acorn Lever Knob:  The acorn lever door knob shown here is the apex of elegance and detail.  Hardware of this caliber is not for everybody, but for the exclusive few who desire the top end in quality.  This was executed in stainless and bronze. OLYMPUS DIGITAL CAMERANut and Bolt:  Highly detailed ornamental fastening hardware was in use from about the 1850’s to 1900’s.   Precious few good  examples of this hardware exist today.  We have the ability to create: nuts, bolts, screws, washers and custom fasteners in exquisite design detail.  This bronze nut and bolt features ball ends,acorn cap design, flanges and 31/32″x 32 threads per inch (extremely fine) threads.nutsboltsCrane Cap Mott Foot Leg: This leg has a Crane style top end cap and a Mott style lower foot. These can be made in the above mentioned materials and sizes. Different overall lengths of leg are made to your spec.OLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERADeco Knob:  Special features will be incorporated into the hardware at the customers request.  For heavy duty use, this knob has a heavily proportioned design in aluminum  for both knob and rosette in a very modern Deco pattern.  As some of you might have noticed (after years of heavy use)  door knob stems and rosettes wear out and get sloppy and shake in their action.  This door knob has a Torrington 15/16″ needle roller bearing at the stem and rosette.  It is a door knob that will hold precision tolerance for years on end.OLYMPUS DIGITAL CAMERABronze Hook:  We detail our original designs to the highest degree we can.  The semi polished satin finish highlights this crispness wonderfully.   This was done in a Victorian nautical theme.victtoptvicsidetBronze Acorn Door Knob:  Unusually shaped door knobs can be readily made in our studios out of varied metals such as: brass, bronze, nickel,   stainless, monel, inconel, steel, cast iron, aluminum, gold, copper, silver and titanium.  This door knob  has a Victorian theme with edge knurling and hidden security fastening for rosette & stem.OLYMPUS DIGITAL CAMERADeco Towel Bar :  Towel bars can be produced in any length and various mounting configurations.  This bar uses reclaimed 7/8″ glass rod from the mid1920’s.  The screw mounted brackets are in aluminum and copper in the Deco school of designglasstowelbar2OLYMPUS DIGITAL CAMERAglasstowelbarLeg Caps:  These are sink leg caps.  The foreground view shows them in full glass like polish with clear coat.  The background view  shows the caps as semi finished  with mounting pins for floor or sink base.   The legs can be fabricated out of  wood, glass or metal  tube by us.  In Manhattan please visit (www.demolitiondepot.com).  When there ask for Evan for some of N.Y.’s finest antiques.Victorian Towel Bar :  This all bronze towel bar is an original design with a Victorian flavor.  It is 3/8″ stud mounted with set screws to the wall.  Shown here are but a few of the many designs and patterns we produce.  Please visit this site from time to time for more released productssinklegendVictorian Towel Bar :  This all bronze towel bar is an original design with a Victorian flavor.  It is 3/8″ stud mounted with set screws to the wall.  Shown here are but a few of the many designs and patterns we produce.  Please visit this site from time to time for more released productsOLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERAAdjustable Leg Caps:  These leg caps are in bronze. The ones on the left are in satin crocus finish suitable for plating of  your choice.  The caps on the right are full polish and clear coated.  Note the taller double ball style caps are the lower ones.  The shorter caps are two piece units threaded inside on another to accommodate uneven floors.  These are on display at French & Italian Furniture Craftsman Corp. (www.frenchanditalian.com)   Patrick is a master craftsman in the  restoration and creation of furniture. His work will astound you!decoleg1decoleg22″ Leg Caps:  Similar to the above 1 1/2″ adjustable leg caps, these are more robust for a larger diameter leg.   Original patterns can be modified in proportion to: longer, shorter, thinner or heaviermodifications.bigadjustableleg1″Victorian Drawer Pulls: These pulls are machined in solid copper and aluminum. They can be made in the mentioned above metals and in different diameters. The back of these knobs can be drilled and tapped to your specs.OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERACrane Cap Mott Foot Leg: This leg has a Crane style top end cap and a Mott style lower foot. These can be made in the above mentioned materials and sizes. Different overall lengths of leg are made to your spec.OLYMPUS DIGITAL CAMERACrane Adjustable Leg Cap: This leg cap has the advantage of being adjustable in height. Irregularities in floor to sink top height can be compensated in this way. A 3/4″-16tpi stud is fastened to the leg and the cap is threaded to receive it. Turning the upper leg cap up or down will increase or decrease the length of the leg.OLYMPUS DIGITAL CAMERACranecapmottfootlegNickel silver acorn drawer pull: This drawer pull is machined from a nickel silver alloy giving it it’s “yellow – white” luster. This type of alloy is available in limited supply. It is capped by a chrome steel ball point.OLYMPUS DIGITAL CAMERAVictorian door knob and rosette: This knob and rosette is machined in bronze, but can be machined in stainless, aluminum, nickel silver, brass and precious metals.OLYMPUS DIGITAL CAMERAVictorian Coat Racks: The coat racks shown here are created in the Victorian style. They are a 17″ 4 pin and a 24″ 6 pin style. They use 7/16″ soild brass pins turned in a 7 ball on ball style. No screws are used as they are pressed and epoxied in oblique blind holes drilled into the red oak moulding. These can be made with vairious types of wood moulding, pin styles and materials.OLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERA