This is a 0-1/2″ carbid
This is a carbider tipped, tenths reading mike with a thimble speeder.
This image courtesy Frank Joy @ www.gryphonstrings.com
This is a 0-1/2″ carbide tipped, tenths reading mike with a thimble speeder. The thimble, speeder and lock knob are trimmed in nickel silver.
This is a 0-1/2″ carbide tipped, tenths reading mike with a thimble speeder. The thimble, speeder and lock knob are trimmed in nickel silver. The lock knob is jeweled with a pidgeon blood ruby set in 10kt. gold.
This is a 6″ level with a ground tool steel base and a brass & bronze level vial. It is adjustable with a .005″/ft. vial glass.
Rule holder in bronze with a 5 pound pull rare earth magnet inserted.
This is a 12″ level with brass and bronze level tube, end caps and adjustment stands. The level has a ground steel base. The vial used is accurate to .005″/ 1 ft.
This is a “Gothic” style 0-1″ mike that reads .001″ based on a pre WW II era Slocomb.
Shown here is a 1″-2″ “Gothic” mike that reads .001″ based on a pre WWII era Slocomb.
Shown in this image is our 0-1″ carbibe tipped, .0001″ reading, friction thimble micrometer.